Asn Gw Service Thresholds - Cisco ASR 5000 Series Thresholding Configuration Manual

Hide thumbs Also See for ASR 5000 Series:
Table of Contents

Advertisement

Chapter 3

ASN GW Service Thresholds

ASN GW Service thresholds generate alerts or alarms for the average number of calls setup. A threshold can be
configured to report this information on entire system for ASN GW service. Thresholds can also be configured for
session registration response failures, discarded interface registration requests, discarded network entry registration
acknowledgments for ASN GW services.
Alerts or alarms are triggered for these ASN GW thresholds based on the following rules:
Enter condition: When the actual average of call setups or actual number of failures or discards passes, or is
equal to, the configured Threshold value an alert or alarm is set.
Clear condition: When the actual average of call setups or actual number of failures or discards passes below
the Threshold value the alert or alarm is cleared.
If a trigger condition occurs within the polling interval, the alert or alarm is not generated until the end of the polling
interval.
OL-25552-02
Cisco ASR 5000 Series Thresholding Configuration Guide ▄
29

Advertisement

Table of Contents
loading

Table of Contents