Configuring Cscf Thresholds; Enabling Cscf Service Thresholds; Configuring Cscf Service Thresholds - Cisco ASR 5000 Series Thresholding Configuration Manual

▀ Configuring CSCF Thresholds

Configuring CSCF Thresholds
This section describes how to enable and configure CSCF Service thresholds.

Enabling CSCF Service Thresholds

To enable threshold monitoring for a CSCF service, use the following configuration:
configure
context <context_name>

Configuring CSCF Service Thresholds

The following thresholds can be configured for a CSCF Service:
Number of CSCF call setup failures
Number of total active CSCF calls
Number of CSCF call setup failures due to no-resource
Number of CSCF Presence errors
Number of CSCF Registration Authentication failures
Number of CSCF call setup failures due to TCP error
Number of CSCF calls per polling interval
Number of CSCF registrations per polling interval
Number of total CSCF active registrations
Maximum number of route-failures, after which the alarm/alert will be raised
Use the following example to configure these thresholds:
configuration
context <context_name>
▄ Cisco ASR 5000 Series Thresholding Configuration Guide
58
cscf-service <name>
threshold monitoring
end
cscf-service <name>
threshold call-setup-failures <high_thresh> [ clear <low_thresh>]
threshold call-total-active <high_thresh> [ clear <low_thresh> ]
threshold error-no-resource <high_thresh> [ clear <low_thresh>]
CSCF Service Thresholds
OL-25552-02