System-Level Asn Gw Service Thresholds; Configuring System-Level Asn Gw Service Thresholds - Cisco ASR 5000 Series Thresholding Configuration Manual

ASN GW Service Thresholds

System-Level ASN GW Service Thresholds

The system-level thresholds for ASN GW Service-Level can be configured to monitor thresholds for subscriber network
entry, authentication, session registration response failures, discarded registration requests, session timeout, and hand-
off denials for individual ASN GW services.
Following thresholds can be configured for the ASN GW service-level:
Number of ASN GW Authentication failures
Number of ASN GW hand-off denials
Maximum number of EAP retries
Number of network entry denials
Number of Network Access Identifier (NAI) in R6 message
ASN GW timeout duration during session setup
ASN GW session timeout duration

Configuring System-level ASN GW Service Thresholds

Use the following example to configure and enable these thresholds:
configuration
threshold asngw-auth-failure <high_thresh> [clear <low_thresh>]
threshold asngw-handoff-denial <high_thresh> [clear <low_thresh>]
threshold asngw-max-eap-retry <high_thresh> [clear <low_thresh>]
threshold asngw-network-entry-denial <high_thresh> [clear
threshold asngw-r6-invalid-nai <high_thresh> [clear <low_thresh>]
threshold asngw-session-setup-timeout <high_thresh> [clear
threshold asngw-session-timeout <high_thresh> [clear <low_thresh>]
threshold poll asngw-auth-failure interval <time>
threshold poll asngw-handoff-denial interval <time>
threshold poll asngw-max-eap-retry interval <time>
threshold poll asngw-network-entry-denial interval <time>
threshold poll asngw-r6-invalid-nai interval <time>
threshold poll asngw-session-setup-timeout interval <time>
threshold poll asngw-session-timeout interval <time>
OL-25552-02
System-Level ASN GW Service Thresholds ▀
Cisco ASR 5000 Series Thresholding Configuration Guide ▄
<low_thresh>]
<low_thresh>]
31