Per-Ha Service Thresholds; Configuring Per-Ha Service Thresholds - Cisco ASR 5000 Series Thresholding Configuration Manual

▀ Per-HA Service Thresholds

Per-HA Service Thresholds
Per-HA service thresholds generate alerts or alarms based on the total number of sessions facilitated by any HA service
configured on the system during the specified polling interval.
Alerts or alarms are triggered for sessions per-HA service based on the following rules:
Enter condition: Actual total number of sessions > or = High Threshold
Clear condition: Actual total number of sessions < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.

Configuring Per-HA Service Thresholds

Configure the per-HA service thresholds by entering the following command:
configure
threshold per-service-ha-sessions <high_thresh> [ clear <low_thresh> ]
threshold poll per-service-ha-sessions interval <time>
threshold monitoring subscriber
end
▄ Cisco ASR 5000 Series Thresholding Configuration Guide
116
Per-service Session Thresholds
OL-25552-02