Per-Pdsn Service Thresholds; Configuring Per-Pdsn Service Thresholds - Cisco ASR 5000 Series Thresholding Configuration Manual

Per-service Session Thresholds

Per-PDSN Service Thresholds

Per-PDSN service thresholds generate alerts or alarms based on the total number of sessions facilitated by any PDSN
service configured on the system during the specified polling interval.
Alerts or alarms are triggered for sessions per-PDSN service based on the following rules:
Enter condition: Actual total number of sessions > or = High Threshold
Clear condition: Actual total number of sessions < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.
This section provides instructions for configuring per-PDSN service thresholding. These instructions assume that you
are at the prompt for the Global Configuration mode:

Configuring Per-PDSN Service Thresholds

Use the following example to configure the per-PDSN service thresholds:
configure
threshold per-service-pdsn-sessions <high_thresh> [ clear <low_thresh> ]
threshold poll per-service-pdsn-sessions interval <time>
threshold monitoring subscriber
end
OL-25552-02
Cisco ASR 5000 Series Thresholding Configuration Guide ▄
Per-PDSN Service Thresholds ▀
115