Extron electronics MVC 121 Plus User Manual page 55

The DSP Configurator program updates the current configuration with the configuration
from the MVC 121 and is now connected live. Changes to the configuration will be
reflected immediately in the device operation.
8. Click OK (see figure 50,
The DSP Configurator program uploads the current file created or opened in Emulate
mode to the MVC 121. The file overwrites the configuration of the device, and
DSP Configurator is now connected live. Changes to the configuration will be reflected
immediately in the device operation.
NOTE: When changes are made to the configuration using DSP Configurator,
the changes are immediately made to the MVC 121. However, if the program is
disconnected from the mixer or shut down before the new configuration is saved,
the mixer will revert back to the previously saved configuration.
).
3
MVC 121 Plus • Software Control 47