Command/Response Table For Mvc 121 Plus Dsp Sis Commands - Extron electronics MVC 121 Plus User Manual

Command/Response Table for MVC 121 Plus DSP SIS Commands
Command
NOTE: The command format is the same regardless of the control or mix-point selection. The acceptable adjustment range varies
depending on the control or mix-point:
The mic/line input gain range is -18 dB to +60 dB (-180 to 600), in 0.1 dB increments.
•
• The line input gain range is -18 dB to +24 dB (-180 to 240), in 0.1 dB increments.
• The fixed output gain range is -24 dB to +12 dB (-240 to 120), in 0.1 dB increments.
All responses are shown with the MVC 121 Plus in Verbose mode 2 or 3.
Input Audio Selection and Control
Set line 3 input levels
Example 1: Set line input
3 right to +4.0 dB
Example 2: Set line input
3 left to -8.0 dB
Set a mic/line input level
Example 1: Set mic input 1 to
+40.0 dB
Example 2: Set mic input 2 to
-12.5 dB
Read a line input level
Example: Read line input 3 left
channel level
Read a mic/line input level
Example: Read mic input 1
Output Audio Selection and Control
Set Output Gain (fixed) Levels
Example 1: Set fixed output left
channel to +10.5 dB
Example 2: Set fixed output right
channel to -14.0 dB
Audio Mute
Mute any input, mix-point or fixed
output.
Example:
Unmute any input, mix-point, or fixed
output.
Read audio mute status of any input,
mix-point, or fixed output.
NOTE: Mixpoint DSP commands are for mute only. The gain control uses standard SIS "G" commands.
Key:
X6)
= Gain and trim control or mix-point select
X6@
=
Line input gain level value
Mic input gain level value
ASCII Command Response
(Host to Tuner) (Tuner to Host)
E X6) X6@ }
G * AU DsG
E }
G30001*40 AU DsG30001*40
E }
G30000*– 80 AU DsG30000*– 80
E X6) X6@ }
G * AU DsG
E }
G40000*400 AU DsG40000*400
E }
G 40001*–125 AU DsG40001*–125
E X6) } X6@ ]
G AU
E }
G 30000AU 40
E X6) } X6@ ]
G AU
E }
G 40000 AU 400
E X6) X6@ }
G * AU DsG
E }
G60002*105 AU DsG60002*105
E }
G60003*– 140 AU DsG60003*– 140
E X6) }
M *1AU DsM
E }
M 20001*1AU DsM20001
E X6) }
M * 0AU DsM
E X6) }
M AU DsM
See table 1 on page 38
-18.0
Line: dB to
-18.0 +60.0
Mic: dB to
Additional Description
X6) X6@ ]
Set line 3 gain control
*
value of
Line input 3 right channel gain set to
]
+4.0 dB.
]
Line input 3 left channel gain set to
-8.0 dB.
X6) X6@ ]
Set mic gain control
*
of
Mic input 1 gain set to +40.0 dB.
]
Mic input 2 gain set to -12.5 dB.
]
Read input
] Line input 1 left channel gain set to
+4.0 dB.
Read mic input
X6@
] Mic input 1 gain set to +40.0 dB.
Set output level gain control
X6) X6@ ]
*
a value of
]
Fixed output L gain set to +10.5 dB.
]
Fixed output R gain set to -14.0 dB.
X6) ]
1 Mute audio processor
*
Mute mix-point input 1 to
]
1
*
output 2.
X6) ]
0 Unmute audio point
*
X6) X6$ ] X6$
*
+24.0
dB (-180 to 240) in 0.1 dB increments.
dB, (-180 to 600) in 0.1 dB increments
MVC 121 Plus • SIS Programming and Control
X6)
to a
X6@
dB.
X6)
to a value
X6@
dB.
X6) X6@
value of dB.
X6)
value of
dB.
X6)
X6@
dB.
X6)
.
X6)
.
: 0 = mute off,
1 = mute on
to
37