Creating / Altering Single-Point Darts 1 - Pfaff 3586-25 Series Instruction Manual

11

Creating / altering single-point darts 1

.02.01
 Switch the machine on.
 Call up "Input" mode.
 Call up seam program input.
 Call up the menu for machining a dart 1.
 Enter programme number.
Description of the functions
Input
This function is used to call up the basic input mode.
Stitch length
This function is used to call up the menu for inputting the stitch length.
Sewing
This function is used to conclude the seam program input and the machine switches to
sewing mode.
Dart length
Function 1 is used to input the value for the dart length.
Dart depth
Function 2 is used to input the value for the dart depth.
Curvature
Function 3 is used to input the value for the curvature.
Starting point displacement
Function 4 is used to input the value for the starting point displacement.
Start backtack
This function is used to activate the start backtack.
Starting stitch condensation
This function is used to activate the starting stitch condensation.
1
3
4
2
Input
55