Creating/Altering A Sealing Program - Pfaff 8310-041 Instruction Manual

10

Creating/altering a sealing program

.05
Up to 100 sealing programs (0 – 99) each with up to 20 sealing zones can be filed and mana-
ged in the machine memory.
With the programming function it is possible to enter the programming function of the
●
sealing programs. A number block for entering the desired program number appears on
the display.
If no program is filed in the memory under the program number selected, the current
sealing parameter of the manual sealing function will be taken over and a new program cre-
ated.
As an alternative to the creation of a new program, the program number of an existing pro-
gram (e.g. 50) can be selected, and this program can be changed or copied to create a new
program. In the case of existing programs, the number of zones and possibly a comment are
displayed next to the program number in the headline.
Enter the program number, e.g. "50".
●
Confirm selection.
●
The first zone of the selected program is displayed on the screen with functions for ente-
ring sealing parameters, notes, switching to the next zone, as well as basic functions for the
program input. For further descriptions of the functions see Chapter 10.05.07 Example for
sealing program input.
Creating a new program
Sealing
Altering a program
37