Pfaff 3586-25 Series Instruction Manual page 74

Input
Description of the functions
Input
This function is used to call up the basic input mode.
Home position
This function is used to move the machine to home position.
Seam program input
This function is used to call up the menu for inputting or altering seam programs.
Program management
This function is used to manage the data from the machine memory and SD card, see
chapter 11.05 Program management.
Parameter settings
This function is used to call up the menu for changing parameter settings, see chapter 13.11
Parameter settings.
Info
This function opens a menu to display the following information:
- Current software status of the machine
- Current fi rmware status of the machine
- Current fi rmware status of the control panel
- Current fi rmware status of the main drive
- Daily piece counter
- Operating hours counter
- Production hours counter
Country settings
This functions opens a menu to select the language displayed on the control panel, see
chapter 8.04 Selecting the language.
Rights of access
This function opens a menu to defi ne the rights of access, see chapter 11.05 Rights of
access.
Stepping motors: X / Y-direction (carriage)
This function opens a menu to move the carriage stepping motors.
Stepping motors: depth
This function opens a menu to move the stepping motor for the depth.
Sewing motor
This function opens a menu to test and adjust the sewing motor, see chapter 13.10 Sewing
motor settings.
Service menu
This function is used to call up the menu for selecting various service functions, see
chapter 13.09 Service menu.
Teach-in
This function is used to call up the Create / alter a free program menu.
Stitch length
This function is used to call up the menu for inputting the stitch length.
74
The daily piece counter can be reset with the "Clear" function.