Adjustment
13
Moving the sewing head
.05
Slide the workholder bar 1 to the left and fold it out.
Tilt the material take-over unit 2 backwards (screws 3, two screws in total).
Slid the cover plate 4 (screws 5) to the left.
Move the sewing head.
Assemble in reverse order
90
Shut off the compressed air!
Switch off the machine and secure it against reactivation!
Risk of injury due to accidental machine start-up!
Fig. 13 - 01
5
4
1
3
5
2