Creating / Altering Single-Point Darts - Pfaff 3519-5/01 Instruction Manual

Input
11

Creating / altering single-point darts

.02.01
● Switch the machine on.
● Call up input mode.
● Call up seam program input.
● Call up the entry for single-point darts.
● Select the program number, see chapter 9.07 Selecting a program number.
● Enter or alter the values for dart length L1, waist length L2 and dart depth L3.
● Enter or change the material thickness.
Description of further functions
Start backtack
This function is used to switch the start backtack on or off.
Starting stitch condensation
This function is used to switch the starting stitch condensation on or off.
Comment
This function opens a menu for entering a comment about the current program, see chapter
11.02.04 Entering a comment.
Correction values
This function opens a menu for entering the correction values and the uncut material fold
length, see chapter 11.02.05 Entering correction values.
Conclude programming
This function concludes seam programming, see chapter 11.02.06 Concluding seam
programming.
48