Creating / Altering Seam Programs - Pfaff 3586-25 Series Instruction Manual

11

Creating / altering seam programs

.02
Seam programs are created or changed in the seam program input menu using the touch
screen on the control panel. The seam type to be machined and the corresponding program
number are selected after calling up the seam program input menu.
Allocation of the additional seam functions to the seam type
Start back-
tack
Starting
stitch conden-
sation
End back-
tack
End stitch
condensation
Angle seam
end
Basting
seam
 Switch the machine on.
 Call up "Input" mode.
 Call up seam program input.
 Select seam type.
 Enter programme number.
 Create or change the seam program, see chapter 11.03 Example for seam program
input.
Dart 2
Dart 1
pre-set pre-set pre-set
selecta- selecta- selecta-
ble ble
selecta- selecta-
pre-set
ble ble
selecta-
pre-set pre-set
with end with end
stitch stitch
conden- conden- possible
sation sation
not not selecta-
possible possible
Waist
Basting
Waist
pleat 1
pleat 2 seam
pre-set
possible
selecta-
pre-set
ble ble
not not pos-
possible sible
manda-
pre-set
ble tory
not not
possible possible
selecta-
ble ble possible
Input
Double-
Double-
point with
point
straight
stream
not
pre-set pre-set
selecta- selecta-
ble ble
selecta- selecta-
ble ble
pre-set pre-set
with end with end
not
stitch stitch
conden- conden-
sation sation
not not pos- not
sible possible
53