Automatic Sewing - Pfaff 3586-25 Series Instruction Manual

Sewing
10

Automatic sewing

.01
Automatic sewing is always called up fi rst after switching on the machine
 Switch the machine on.
 Select the desired program number, see chapter 9.06 Selecting a program number.
 Insert the sewing material.
 Start the program sequence by sliding in the loading table.
 Switch on the loading table suction, see chapter 7.05 Blower switch
Description of the functions
Program number selection
This functions opens the menu for inputting the program number, see chapter 9.06
Selecting a program number.
Bobbin thread stitch counter
This function opens the menu for inputting and resetting the bobbin thread stitches, see
chapter 9.08 Setting the bobbin thread stitch counter.
Input menu
This function is used to call up "Input" mode, see chapter 11 Input.
Automatic sewing / manual sewing
This function toggles between automatic and manual sewing. The relevant symbol for the
current operations mode is displayed.
Material thickness
This function opens the menu to change the material thickness.
Foot up / down
This function is used to raise or lower the sewing foot. It also opens or closes the thread
clamp. Only appears in the home position or in the seam at sewing stop.
Home position
These functions are used to move the machine to home position.
44
(only on the Pfaff 3586-25/01)