Table of Contents
Advertisement
Open and exit Stitch Creator
To open, just touch the Stitch Creator
on the option bar. To close Stitch Creator
and sew your created stitch or combination, touch
OK in the top right corner of the screen.
Note: If your programmed stitch is ready to be sewn, you
can also close the active function by pressing the foot
control, or by pressing the start/stop button.
Some stitches cannot be used with Stitch Creator
feature. If you try to select one of these stitches, a
pop-up will notify you.
stitch point
A stitch point is the point where the needle goes
through the fabric. Stitch points are connected by
stitches.
Each stitch point is indicated by a green dot. A
selected stitch point is indicated by an outlined
square.
Start creating - add a stitch
or stitch point
To add a new stitch point touch the new stitch point
icon. You can also add a built-in stitch from the
selection menu.
Select stitch points
To select a stitch point, just touch it on screen with
your stylus or use the arrows in the select stitch
point control. If selecting more than one stitch
point with the stylus, the stitches between the two
stitch points will automatically be selected as well,
marked with green color (A and B in picture).
You can also select stitch points by activating select
stitch point control. First, touch the button symbol
in the middle of the control. The button symbol will
be surrounded by a green circle to indicate that it
is active. Use the up arrow to select stitch points
before the marked stitch point and the down arrow
to select the stitch points after the marked stitch
point.
Note: If selecting stitch points using the up arrow, you
can deselect them by touching the down arrow.
control is the marked stitch point. The second
number is the total number of stitch points.
feature
™
feature icon
™
™
feature
™
Selection menu
Stitch Creator
OK, close Stitch
Creator
New stitch point
B
A
Select stitch point
feature
™
feature
™
6:3
Advertisement
Table of Contents
