Pfaff 3586-25 Series Instruction Manual page 65

 Confi rm the input.
 Call up function 2 and enter value "20" for the dart depth on the number block.
 Confi rm the input.
The values for the curvature (functions 4 and 5) remain unchanged.
 Call up function 3 and enter value "20" for the waist depth on the number block.
 Confi rm the input.
 Call up function 7 and enter value "57" for the waist length on the number block.
 Confi rm the input.
 Activate the start backtack.
 Conclude the seam program input.
The values are checked and the seam construction diagram is calculated. If errors are
detected, these are displayed with a corresponding message.
 Save the seam program.
Input
65