Table of Contents
Advertisement
2.4.2 Wall Mounting
Before you start:
You need to prepare the wall mounting bracket first.
For cement wall, you need to use the expansion bolt to fix the
bracket.
For wooden wall, you can just use the self-tapping screw to fix
the bracket.
Make sure that the wall is strong enough to withstand more
than eight times the weight of the camera and its accessories.
Steps:
1.
Install the bracket.
1) Drill four Φ12 holes, and insert four M8 screws.
2) Route the cables from the bracket, and fix the bracket with
four flat washers and four hex nuts, as shown in Figure 2-14.
Network PTZ Camera·Quick Start Guide
Figure 2-14 Install the Bracket
16
Advertisement
Table of Contents
