Wall Mounting - HIKVISION PanoVu Mini Quick Start Manual

Note:
Align the FRONT label on the camera with the FRONT label
on the installation plate.
2) Remove the protective films after installation.
Note:
Do not touch the bubble directly with your hands. Otherwise,
the image may blur.

2.1.3 Wall Mounting

Before you start:

You need to prepare the wall mounting bracket first.

For cement wall, you need to use the expansion screw to fix the
bracket.

For wooden wall, you can just use the self-tapping screw to fix
the bracket.

Make sure that the wall is strong enough to withstand more
than eight times the weight of the camera and its accessories.
Steps:
1. Install the bracket seat.
1) Drill four screw holes into the wall where you want to install
the camera according to the screw holes on the bracket seat.
2) Insert the four expansion screws into the screw holes.
3) Fix the bracket seat on the wall with four PA4×25 screws as
shown in Figure 2-7.
Network PTZ Camera·Quick Start Guide
10