5 Operating via Hik-Connect App
Purpose:
Hik-Connect is an application for mobile devices. With the App, you
can view live image of the camera, receive alarm notification and so
on.
5.1 Enable Hik-Connect Service on Camera
Purpose:
Hik-Connect service should be enabled on your camera before using
the service.
You can enable the service through SADP software or web browser.
5.1.1 Enable Hik-Connect Service via SADP Software
Steps:
1.
Check Enable Hik-Connect on:
1) "Activate the Device" page during camera activation, refer to
section 3.2.2 Activation via SADP Software.
2) Or "Modify Network Parameters" page during modifying IP
address, refer to section 3.3 Modifying the IP Address.
Note:
The functions vary depending on different camera models.
2.
Create a verification code or change the verification code.
Network PTZ Camera·Quick Start Guide
32