Outdoor Wall Mounting - HIKVISION DS-2CC51A7N-VP User Manual

Day/Night High-definition Dome Camera·User Manual

2.2.4 Outdoor Wall Mounting

For the wall mounting, you have to purchase a wall mount.
Steps:
1. Secure the wall mount to the wall.
2. Loosen the three set screws on the edge of the front panel.
Remove the front panel.
Figure 2-13 Removing the Front Panel
3. Route the cables through the hole in the center of the wall
mount.
4. Align the camera with the wall mount.
5. Tighten the set screws to secure the camera with the wall
mount.
6. Connect the video output connector to the monitor. Connect
the power connector to the power supply.
Set Screws
16
Front Panel