Table of Contents
Advertisement
To view and configure the camera via LAN (Local Area Network), you
need to connect the network camera in the same subnet with your
PC.
Use the SADP software or client software to search and change the
IP address of the device. We take modifying the IP Address via SADP
software as an example to introduce the IP address modification.
Note:
For IP address modification via client software, refer to the user
manual of client software.
Steps:
1.
Run the SADP software.
2.
Select an active device.
3.
Change the device IP address to the same subnet with your
computer by either modifying the IP address manually or
checking Enable DHCP.
Network PTZ Camera·Quick Start Guide
27
Advertisement
Table of Contents
