Installation; Installing Type I Camera; Installing The Memory Card - HIKVISION PanoVu Mini Quick Start Manual

2 Installation

Before you start:
Check the package contents and make sure that the device in the
package is in good condition and all the assembly parts are included.
Note:
Do not power the camera up until the installation is finished. To
ensure the safety of personnel and equipment, all the installation
steps should be done with power supply off.

2.1 Installing Type I Camera

2.1.1 Installing the Memory Card

(Optional) You can install the memory card for local storage.
Steps:
1. Rotate the installation plate anticlockwise to separate it from
the camera as shown in Figure 2-1.
Note:
Keep the installation plate for camera mounting.
Network PTZ Camera·Quick Start Guide
6