Ceiling Mounting With Junction Box; Wall Mounting - HIKVISION TURBO HD DS-2CE57H0T-VPITE User Manual

2.1.2 Ceiling Mounting with Junction Box

Before you start:
You need to purchase an inclined ceiling mount
separately.
Steps:
1. Paste the drill template to the ceiling.
2. Drill 2 screw holes and the cable hole in the ceiling
according to the drill template.
3. Install the junction box to the ceiling with two PA4 ×
25 screws.
4. Repeat the step 3 to 8 of 2.1.1 Ceiling Mounting
without Junction Box to finish the installation.

2.1.3 Wall Mounting

Before you start:
You need to purchase a wall mounting bracket
separately.
Wall Mounting with Plastic Bracket
Steps:
1. Remove the bubble by loosening the screws.
2. Secure the mounting base to the bracket with three
M4 × 10 screws.
Figure 2-7 Secure the Mounting Base to the Bracket
3. Paste the drill template of the bracket on the
installation position.
4. Route and connect the cables.
5. Install the bracket on the wall with four M6 × 75
expansion bolts.
Figure 2-8 Install the Bracket on the Wall
6. Refer to steps 6 to 8 of 2.1.1 Ceiling Mounting
without Junction Box to finish installation.
Figure 2-6 Fix the Junction Box
Figure 2-9 Finish Installation
4