1.
Remove the bubble.
1) Rotate the white ring clockwise on the top of the camera, and
remove the cover, as shown Figure 2-20.
2) Unscrew the four screws on the metal ring, as shown in
Figure 2-21.
3) Rotate the metal ring, and you can remove the metal ring
when the hole on the metal ring aligns with the joint on the
black plastic component. Remove the Bubble.
Network PTZ Camera·Quick Start Guide
White Ring
Figure 2-20 Remove the Cover
Four Screws
Figure 2-21 Unscrew the Screws
Cover
Metal Ring
20