Table of Contents
Advertisement
You need to enable the Hik-Connect service on camera before adding
it to your Hik-Connect account. Refer to section 5.1 Enable
Hik-Connect Service on Camera.
Steps:
1.
Use a network cable to connect the camera with a router if the
camera does not support Wi-Fi.
Note:
After the camera connects to the network, wait one minute
before any operation on the camera using Hik-Connect app.
2.
In the Hik-Connect app, tap "+" on the upper-right corner and
then scan the QR code of the camera to add the camera.
You can find the QR code on the camera or on the cover of the
quick start guide of the camera in the package.
Note:
Network PTZ Camera·Quick Start Guide
Figure 5-2 Connect a Router
Figure 5-3 Scan QR Code
35
Advertisement
Table of Contents
