Table of Contents
Advertisement
1.
Unscrew the two screws on the memory card slot cover on the
top of the camera, as shown in Figure 2-12, and remove the
memory card slot.
Memory Card Slot
2.
Insert the memory card into the memory card slot, as shown in
Figure 2-13.
3.
Install the memory card slot cover back, and tighten the screws
to fix it.
Network PTZ Camera·Quick Start Guide
Figure 2-12 Unscrew the Screws
Figure 2-13 Insert the Memory Card
Two Screws
Memory Card Slot
15
Advertisement
Table of Contents
