Cleaning Honeycomb Assemblies; Cleaning Stainless Steel Rails - Hussmann Freedom Line series Installation & Operation Manual

P/N 0527427_M

CLEANING HONEYCOMB ASSEMBLIES

Honeycombs should be cleaned every six
months. Dirty honeycombs will cause mer-
chandisers to perform poorly. The honey-
combs may be cleaned with a vacuum cleaner.
Soap and water may be used if all water is
removed from the honeycomb cells before
replacing. Be careful not to damage the honey-
combs.
Multi-deck Merchandisers
1. Loosen or remove screw to free honey-
comb.
2. Clean and dry the honeycomb.
3. After cleaning, replace honeycomb and
slide retainer forward. Reinstall screw.
Damaged honeycomb must be replaced.
LED Light Bars
Honeycomb
Air Straightener
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Retainer
Screw
Fluorescent Lamps
Honeycomb
Air Straightener

CLEANING STAINLESS STEEL RAILS

Use non-abrasive cleaning materials, and
always polish with grain of the steel. Use warm
water or add a mild detergent to the water and
apply with a cloth. Always wipe rails dry after
wetting.
Use alkaline chlorinated or non-chlorine
containing cleaners such as window cleaners
and mild detergents. Do not use cleaners
containing salts as this may cause pitting and
rusting of the stainless steel finish. Do not use
bleach.
Clean frequently to avoid build-up of hard,
stubborn stains. A stainless steel cleaning
solution may be used periodically to minimize
scratching and remove stains.
Rinse and wipe dry immediately after cleaning.
Never use hydrochloric acid (muriatic acid) on
stainless steel.
Freedom Line Multi-Deck
Freedom Line Multi-Deck
Retainer
Screw
5-3