Hussmann Freedom Line series Installation & Operation Manual page 27

P/N 0527427_M
INSTALLING NIGHT BLINDS
STEP 1
Slide the lefthand night blind into bracket
A
cutout.
0537396_D
Left section of case always uses
the front cutout. Alternate front
RIGHT HAND VIEW OF
to back for remaining sections.
CANOPY SUPPORT ARM
STEP 2
Swing righthand side of night blind into slot on
side of canopy support arm.
Left section of case always uses
the bottom slot. Alternate bottom
to top for remaining sections.
STEP 3
Push/pull down on night blind slightly to slide
pin past detent.
STEP 4
Check pin engagement to ensure at least 3/16"
of pin is firmly in the slot.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
STEP 1
Night Curtain
Bracket
Rear Cutout
Front Cutout
Detail A
Brackets Always on Left
Side of Night Curtain
Be sure blind is winded and oriented as
shown with arrows, dot and triangle
pointing down before installing.
STEP 2
Night Blind
Detail A
Brackets Always on Left
Side of Night Curtain
Detail B
Slots always on right
side of night blind
Night Blind
Freedom Line Multi-Deck
1-21
Canopy Arm
Slot Profile
Pin
End View of
Night Blind
.188 MIN
.250
STEP 3
0537396_D
Night Curtain
Bracket
Rear Cutout
Front Cutout
Top Slot
Bottom Slot
Detent
Canopy Arm
Slot Profile
Pin
.188 MIN
.250