Cleaning Condensate Pump And Heated Evaporation Pans - Hussmann Freedom Line series Installation & Operation Manual

P/N 0527427_M
CLEANING CONDENSATE PUMP AND
HEATED EVAPORATION PANS
a
lways disconnecT power aT The main
case disconnecT before servicing The
.
equipmenT
• The condensate water outlet for the
self-contained models empties into a limited
capacity evaporation pan.
• Clean product spills immediately. If a
product spill enters the Condensate Pump or
Heated Evaporation Pans, a maintenance
technician may be required to clean both the
pump and heated pans.
• Clean case interior with a sponge or soft
cloth, wetted with mild soap and water. Do
not pour water from a bucket or hose into case
drain. Water introduced during cleaning will
cause the evaporation pan to overflow.
• Sediment and debris will clog the
Condensate Pump and plastic tubing for water
delivery to the Heated Evaporation Pans.
• The Condensate Pump and the Heated
Evaporation Pans require regular monthly
inspection. The Condensate Pump is located
below the case bottom. The Heated Evaporation
Pans are located on the case top. Evidence
of excess water or odor is an indication that
immediate service is required.
• Recommended cleaning the Condensate
Pump reservoir and Heated Evaporation Pans
is with mild soap and water. Disconnect power
before cleaning. Empty pump sump and heater
pans of water before reapplying power.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
• If using the optional Defrost
Synchronization controls, the Master Sync
Switch needs to be reset by the maintenance
technician after re-applying electrical power to
case.
— LOCK OUT / TAG OUT —
To avoid serious injury or death from
electrical shock, always disconnect the
electrical power at the main disconnect
when servicing or replacing any electrical
component. This includes, but is not limited
to, such items as doors, lights, fans, heaters,
and thermostats.
Evaporation Pan is Hot!
and poses risk of bodily injury
— Always wear gloves and
protective eye wear when
servicing condensate pump and
heated evaporation pans. Turn off
evaporation pan heater, and allow
pan to cool before servicing.
Freedom Line Multi-Deck
Freedom Line Multi-Deck
5-5