Cleaning Mirrors - Hussmann Freedom Line series Installation & Operation Manual

Meat, delicatessen, dairy and produce merchandisers compressor ready
Hide thumbs Also See for Freedom Line series:
Table of Contents

Advertisement

m
5-2
aIntenance
Do NOT allow cleaning agent or
cloth to contact food product.
Do NOT Use:
•Abrasive cleansers and scouring pads, as these
will mar the finish.
• Coarse paper towels on coated glass.
•Ammonia-based cleaners on acrylic parts.
•A hose on lighted shelves or submerge the
shelves in water.
•Solvent, oil or acidic based cleaners on any
interior surfaces.
•A hose on rail lights, canopy lights or any
other electrical connection.
Do:
•Remove the product and all loose debris to
avoid clogging the waste outlet.
•Engage shelf light caps if removing shelves.
•Store product in a refrigerated area such as a
cooler. Remove only as much product as can
be taken to the cooler in a timely manner.
•First turn off refrigeration, then disconnect
electrical power.
•Thoroughly clean all surfaces with soap and
hot water. d
o not use steam or high water
pressure hoses to wash the interior
T
hese will desTroy The merchandisers
sealing causing leaks and poor
.
performance
•Lift hinged fan plenum for cleaning. Hook
chain in rear panel to secure plenum during
cleaning.
b
e sure To reposiTion The fan plenum
afTer cleaning merchandiser
•Take care to minimize direct contact between
fan motors and cleaning or rinse water.
•Rinse with hot water, but do NOT flood.
n
ever introduce water faster than the
waste outlet can remove it
•Allow merchandisers to dry before resuming
operation.
P/N 0527427_M
.
'
.
.
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • www.hussmann.com
•Wipe down lighted shelves with a damp
sponge or cloth so that water does not enter
the light channel. d
o not use a hose or
suBmerge shelves in water
•After cleaning is completed, turn on power to
the merchandiser.
•Ensure shelf lights are fully seated and
engaged.

CLEANING MIRRORS

Mirrors are sheets of clear glass that have very
thin reflective and protective coatings applied
to one side. These coatings are susceptible to
deterioration if certain cleaning solutions and
even water are allowed to come in contact
with them. Every precaution should be taken
to keep all liquids away from the coated side
of the mirrors. i
f liquids are allowed
To flow along The face side of The
mirror To iTs edge
up Between the coating and the glass
causing serious damage
To Help Prolong the Life of the Mirrors:
•Use only mild cleaning solutions that do not
leave residue, such as a weak (10%) solution of
vinegar and water.
•Do NOT spray liquids on the mirrors.
Away from food, dampen the cleaning cloth,
then use the cloth to wipe the mirror.
•Wipe water from the mirrors immediately to
prevent difficult to remove water spots and also
to prevent the water from reaching the mirror's
edge.
•Never use dirty cloths, scrapers or any
other abrasive materials for cleaning.
.
,
The liquid can seep
.
,

Advertisement

Table of Contents
loading

Table of Contents