Nice E EDGE XSI 0620 LDC Instructions And Warnings For Installation And Use page 7

4.4.2 - Maximum number of transmitters that can be memorised
The motor has 30 memory locations. A location can either memorise a single
transmitter (in Mode I) or a single button (in Mode II) or a single wireless climate sen-
sor (up to 5 sensors).
4.5 - Programming multiple motors with a single
channel transmitter
In such cases, to avoid the need to disconnect all motors you do not wish to pro-
gram, proceed as follows:
1) - run procedure A.1 to memorise the first transmitter on the motor you wish to pro-
gram;
2) - run procedure A.2 to deactivate all other previously memorised motors, which
you do not wish to program;
3) - program the motor as required, leaving the limit switches to last (*);
4) - at the end, reactivate the previously deactivated motors by pressing ESC.
–––––––––
(*) Note – If you wish to program the "movement duration", run the procedure in
question (A.14) only after having programmed the limit switches.
4
English – 6