Docking Station - Welch Allyn RetinaVue 100 Imager Directions For Use Manual

Directions for use

Docking station

Place the device in the docking station to charge the device or to connect and transfer
data to a computer or laptop PC running the RetinaVue Network™ Client software.
(Requires optional software).
Set up the docking station for charging
1. Turn the docking station over.
2. Connect the USB cable to the docking station.
3. Either plug the USB cable into the wall adapter plug and then plug the wall adapter
into an AC outlet, or plug the USB cable into an open USB port on a computer.
a. Plug the USB cable into the wall adapter plug and then plug the wall adapter into
b. (Optional) Plug the USB cable into an open USB port on a computer.
4. Place the RetinaVue 100 Imager on the docking station charger with the contact pins
of the RetinaVue 100 Imager touching the contact pins of the docking station
charger.
an AC outlet.
2
Using the RetinaVue 100 Imager 23
3