Docking Station; Charge The Battery - Welch Allyn RETeval-DR Directions For Use Manual

14 Setup
Number
4
5
6
7
Not shown
Not shown
If any item is missing, contact Welch Allyn Technical Support:
service. We recommend that you save the shipping box and packing materials in case
you need to store or ship the system.

Docking station

You can place the device in the docking station to charge the device or to connect and
transfer data to a computer or laptop.

Charge the battery

When the RETeval-DR device battery charge is low, a warning message is shown on the
device screen. Return the device to the docking station and let it charge. Do not attempt
to test a patient after this message appears.
The device is powered by an integrated, rechargeable lithium-ion battery. A full charge
permits testing of approximately 70 patients.
The battery icon in the upper-right corner of the screen displays the amount of charge
remaining. The amount of green in the battery icon indicates the remaining capacity.
Note
Item
USB cable
Mains outlet plates
Power brick
Sensor strips
Dust cover
RETeval-DR Directions for use
Misalignment of the USB plug and socket can cause damage. The plug and
socket should be visually inspected prior to each installation of the charging
cable. If you see damage, contact Welch Allyn Technical Support:
www.welchallyn.com/service.
Description
Connects the device to a computer or laptop to transfer results.
Mains outlet plate options that matches available mains outlets.
Connects the device to a mains outlet.
Used to test the eye for diabetic retinopathy.
Protects the device from dust while not in use.
This document. The Directions for use (DFU) is also available as a
portable document format (.pdf ) file located in the root directory
of the RETeval-DR device when the device is connected to a
computer or laptop via the USB cable.
www.welchallyn.com/
® ™
Welch Allyn RETeval-DR