Directions for use
Skip an image capture while in Auto exam mode
1. From the Home screen, touch Exam.
The Pre-acquistion screen appears.
2. Touch
sequence.
3. Touch Start to enter Image acquisition mode and begin the exam of the patient's
eye using the next image in the sequence. The Exam acquisition screen appears.
4. If this is the last image in the sequence, touch
screen and navigate to the Exam summary screen. For a single image, touch
Override to access the Save button and to save the image.
(Next) or touch
(Image Order) to skip to the next image in the
Using the RetinaVue 100 Imager 35
(Accept) on the Image inspection