20 Using the RetinaVue 100 Imager
Set up the eye cup for a patient exam
1. Slide the eye cup over the bezel on the RetinaVue 100 Imager.
2. Use the eye cup to cover the patient's examined eye and allow them to focus on the
green fixation lights.
Docking station
Place the device in the docking station to charge the device or to connect and transfer
data to a computer or laptop PC running the RetinaVue Network™ Client software.
(Requires optional software).
Set up the docking station for charging
1. Turn the docking station over.
2. Connect the USB cable to the docking station.
3. Either plug the USB cable into the wall adapter plug and then plug the wall adapter
into an AC outlet, or plug the USB cable into an open USB port on a computer.
Welch Allyn RetinaVue™ 100 Imager