Welch Allyn RetinaVue 100 Imager Directions For Use Manual page 17

Directions for use
Use the RetinaVue 100 Imager touchscreen inspection control
Inspection screen, then zoom in or out with a pinch or pull. Touch
to the Post-acquisition screen and accept or reject the acquired image.
On the Post-acquisition screen, touch
At the dialogue screen, touch Delete to confirm the discard and to return to the Pre-
acquisition screen to acquire again.
Touch
(Accept) to navigate to the Exam summary screen once the last image of the exam
is acquired.
Exam summary controls (Post-acquisition and Review modes)
Exam summary from the Post-acquisition screen
From the Post-acquisition screen, touch
screen. Each image on the Exam summary screen contains a quality score and status. If
an image is missing touch Override to access the Save button and to save the one
image.
Touch
Image accepted, good quality. Quality scores of 40+.
Touch
(Accept) to accept the image and to navigate to the next image. Or touch
(Accepted good) to view that image.
(Accepted OK) to view that image.
(Trash) or (Discard) to discard the image.
(Accept) to navigate to the Exam summary
Introduction 13
to navigate to the
(Close) to return