Welch Allyn RetinaVue 100 Imager Directions For Use Manual page 34

30 Using the RetinaVue 100 Imager
The Exam acquisition screen appears.
5. Hold the patient end of the RetinaVue 100 Imager two to three inches directly in
front of the patient's examined eye. Continue forward to compress the eye cup
against the examined eye.
6. Direct the patient to focus on the green fixation lights inside the barrel of the
RetinaVue 100 Imager.
Note
WARNING Clean the eye cup after each patient to avoid the
risk of cross-contamination.
Instruct the patient to cover, but not close, their unexamined
eye. This will help the patient to focus on the green fixations
lights.
Welch Allyn RetinaVue™ 100 Imager