Directions for use
Image Pre-acquisition controls (Auto mode)
From the Home screen touch Exam. The Exam Pre-acquisition screen appears.
No. Feature
START
1.
mode.
2.
the Advanced image capture settings screen.
Adjust the flash brightness (-2 to +2) or the focus
settings (-1 to +1).
3.
the sequence.
enters automatic image acquisition
(Image Acquisition Settings) navigates to
(Image Order) skips to the next image in
No. Feature
4.
Navigates to the Home screen.
MANUAL
switches to advanced image capture
5.
options.
(Next) skips to the next image acquisition within
6.
a prescribed image acquisition sequence or navigates to
the Exam summary screen if the last image has been
acquired.
Introduction 11