Table of Contents
Advertisement
Connection schematic
GB
IE
Installation
Installation instructions
12
Antenna
External amplifi er
The device can be installed into any standard ISO mounting duct. In the event that
your vehicle does not have an ISO mounting duct contact your local specialist
establishment, local dealer or the technical department of the store.
NOTICE
►
Before installation remove, without fail, the two transport securing screws
on the top of the housing (marked with a red sticker)!
►
Connect the cable before fi nally installing the device. Make sure that it is
plugged in properly and that the system functions correctly.
■
Install the device in the duct provided for it or select the installation location so
that all buttons can be comfortably reached and the driver is not impeded.
■
Only connect the device to a properly installed 12 V automotive battery.
■
Only connect the device in the vehicle via an ISO plug.
■
Install the device in such a way as to avoid the development of heat accumu-
lation and so that the device is suffi ciently ventilated.
Subwoofer
Installation
Bluetooth antenna
1
3
ISO B
ISO A
Microphone unit
KH 2377
Hide quick links:
Advertisement
Table of Contents
