Installation; Connection - Silvercrest SAB 160 B2 Operating Instructions Manual

Installation

GB
IE

Connection

8
WARNING
Damage may be caused when installing the device
► If possible, have the device installed by a qualifi ed technician.
► If you wish to install the device yourself, follow the instructions for connection
and installation for safe, fault-free use of the device. Incorrect installation can
result in a fi re hazard!
CAUTION
Using incorrect connections can cause damage to the device.
► Use the device's ISO connections when installing the device. Any vehicle-
specifi c ISO adapters you may require can be sourced from a specialist
workshop, a local dealer or a general store's technical department. Using
other connector types voids the warranty.
Assignment of the ISO connections
The view is from behind the plug connector.
1 3 5 7
2 4 6 8
1 3 5 7
2 4 6 8
To connect the device to two speakers, only use the cables for the front speakers.
1
2
3
ISO A (power
4
supply assign-
5
ment)
6
7
8
1
2
ISO B (speaker
3
connection as-
4
signment)
5
6
7
8
Assignment
Not used
Not used
Not used
Permanent plus 12 V
(terminal 30)
Aerial control voltage
Not used
Ignition circuit positive
12 V (terminal 15)
Negative (-) ground
(terminal 31)
Assignment
Rear right +
Rear right -
Front right +
Front right -
Front left +
Front left -
Rear left +
Rear left -
SAB 160 B2