Switching On And Off; Settings - Silvercrest KH 2377 Operating Instructions Manual

Handling and operation
Switching On and Off
Press briefl y the POWER/DIM button to switch the device on. In the
display the notice WELCOME appears.
Briefl y tap the POWER/DIM button. In the display appears AUTO DIM.
Briefl y tap the POWER/DIM button again. In the display appears MAN
DIM.
AUTO DIM: The display illumination will, depending on the lighting conditions,
MAN DIM: The display illumination can be set in two stages (H = High and
To switch off hold down the POWER/DIM button longer.

Settings

WARNING
Hearing damage as a result of too high a volume!
If the volume is set too high it can lead to permanent hearing damage.
► Set the volume to moderate levels only.
Volume
Turn the multi controller to set the volume.
Mute switching (MUTE) on / off
Press the MUTE button to switch the sound off . "MUTE" blinks in the display.
To switch the sound on again press the MUTE button once more. The mute
switching is rescinded when receiving a PTY or TA station.
KH 2377
set automatically.
L = Low) by turning the multi controller.
GB
IE
17