Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align and place the status-light board in the slot on the palm-rest assembly.
2
Slide the status-light board cable into the connector on the system board and close the latch to secure the cable.
Post-requisites
1
Replace the battery.
2
Replace the
base
cover.
Replacing the status-light board
computer. After working inside your computer, follow the instructions in
After working inside
www.dell.com/
Replacing the status-light board
32
55
Advertisement
Table of Contents
