Table of Contents
Advertisement
Replacing the status-light board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align and place the status-light board in the slot on the palm-rest assembly.
2
Adhere the foam securing the status-light board to the palm-rest assembly.
3
Slide the status-light board-cable into the connector on thesystem board and
close the latch to secure the cable.
Post-requisites
1
Replace the battery.
2
Replace the
base
56
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before
Advertisement
Table of Contents
