Replacing The Hard Drive; Procedure - Dell Inspiron 7580 Service Manual

Enable Intel Optane after replacing the SATA storage. For more information about enabling the Intel Optane, see
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION: Hard drives are fragile. Exercise care when handling the hard drive.

Procedure

1 Align the screw holes on the hard-drive bracket with the screw holes on the hard drive.
2 Replace the four screws (M3x3) that secure the hard-drive bracket to the hard drive.
3 Connect the interposer to the hard-drive assembly.
4 Align the screw holes on the hard-drive assembly with the screw holes on the palm-rest assembly and keyboard shield.
5 Replace the three screws (M2x3) that secure the hard-drive assembly to the palm-rest assembly and keyboard shield.
6 Connect the hard-drive cable to the connector on the system board.

Replacing the hard drive

computer. After working inside your computer, follow the instructions in
Enabling Intel Optane.
After working inside
www.dell.com/
Replacing the hard drive
8
19