Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Remove the
base
cover.
Procedure
1
Locate the wireless card on the I/O board.
2
Remove the screw (M2x3) that secures the wireless-card bracket and wireless card to the I/O board.
3
Lift the wireless-card bracket off the wireless card.
4
Disconnect the antenna cables from the wireless card.
5
Slide and remove the wireless card from the wireless-card slot.
Removing the wireless card
computer. After working inside your computer, follow the instructions in
21
After working inside
www.dell.com/
Removing the wireless card
35
Advertisement
Table of Contents
