Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Remove the
base
cover.
Procedure
1
Disconnect the speaker cable from the system board.
2
Note the position of the rubber grommets before lifting the speakers.
3
Lift the right speaker by releasing the rubber grommets from the slots on the palm-rest assembly.
4
Lift the status-light board from the slot on the palm-rest assembly.
5
Note the cable routing and remove the speaker cable from the routing guides on the palm-rest assembly.
6
Lift the left speaker by releasing the rubber grommets from the slots on the palm-rest assembly.
computer. After working inside your computer, follow the instructions in
Removing the speakers
www.dell.com/
19
After working inside
Removing the speakers
33
Advertisement
Table of Contents
