Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Align and place the status-light board in the slot on the palm-rest assembly.
2. Slide the status-light board cable into the connector on the system board and close the latch to secure the cable.
Post-requisites
1. Replace the battery.
2. Replace the
base
cover.
50
Replacing the status-light board
Replacing the status-light board
computer. After working inside your computer, follow the instructions in
32
After
www.dell.com/
Advertisement
Table of Contents
