Replacing The Status-Light Board; Procedure; Post-Requisites - Dell P57F003 Service Manual

GUID-8EDA8A82-09F4-420D-8DE0-82220E44E1C2

Replacing the status-light board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
GUID-F790821E-ACC3-4727-9074-DEAA58C40DBC

Procedure

1 Using the alignment posts, place the status-light board in the slot on the
computer base.
2 Slide the status-light board cable into the connector on the status-light board
and close the latch to secure the cable.
GUID-530FF952-5492-4C67-BD4E-C5D96A9C924E

Post-requisites

1 Replace the palm-rest
2 Replace the keyboard.
3 Follow the procedure from step 4 to step 6 in
4 Replace the battery.
5 Replace the base
54
computer. After working inside your computer, follow
After working inside your
assembly.
cover.
computer. For more safety best
www.dell.com/
"Replacing the hard
Before
drive".