Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Remove the
base
cover.
Procedure
1
Locate the memory module on the system board.
2
Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module slot until the memory module pops
up.
3
Remove the memory module from the memory-module slot.
Removing the memory modules
computer. After working inside your computer, follow the instructions in
After working inside
www.dell.com/
Removing the memory modules
11
23
Advertisement
Table of Contents
