Replacing The Status-Light Board; Procedure; Post-Requisites - Dell Inspiron 14 5443 Service Manual

Replacing the Status-Light
Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Align the screw hole on the status-light board with the screw hole on the
palm rest.
2 Replace the screw that secures the status-light board to the palm rest.
3 Using the alignment posts, place the left speaker on the palm rest.
4 Adhere the status-light board cable to the palm rest and slide the cable
through the slot on the palm rest.
5 Turn the computer over and open the display.
6 Slide the status-light board cable in the connector and press down on
the latch to secure the cable.

Post-requisites

1 Replace the I/O
2 Replace the base
3 Replace the keyboard.
4 Replace the fan.
5 Replace the hard
6 Replace the battery.
7 Replace the base
60
Computer. After working inside your
board.
frame.
drive.
cover.
After Working Inside Your